Rohde & Schwarz RTP044 - Cursor Results

Remote control commands
R&S
®
RTP
1357User Manual 1337.9952.02 ─ 12
22.11.2 Cursor results
CURSor<m>:XDELta[:VALue]?......................................................................................1357
CURSor<m>:XDELta:INVerse?..................................................................................... 1357
CURSor<m>:YDELta[:VALue]?......................................................................................1357
CURSor<m>:YDELta:SLOPe........................................................................................ 1358
CURSor<m>:XDELta[:VALue]?
Queries the delta value (distance) of two vertical cursor lines.
Suffix:
<m>
.
1..4
Selects the cursor set.
Return values:
<Delta> Range: -100E+24 to 100E+24
*RST: 0
Default unit: s
Usage: Query only
Asynchronous command
CURSor<m>:XDELta:INVerse?
Queries the inverse value of the delta value (distance) of the two vertical cursor lines.
Suffix:
<m>
.
1..4
Selects the cursor set.
Return values:
<DeltaInverse> Range: -100E+24 to 100E+24
*RST: 0
Default unit: Hz
Usage: Query only
Asynchronous command
CURSor<m>:YDELta[:VALue]?
Queries the delta value (distance) of the two horizontal cursor lines.
Suffix:
<m>
.
1..4
Selects the cursor set.
Return values:
<Delta> Range: -100E+24 to 100E+24
*RST: 0
Usage: Query only
Asynchronous command
Cursor measurements