Rohde & Schwarz RTP044 - Save; Recall

Remote control commands
R&S
®
RTP
1183User Manual 1337.9952.02 ─ 12
QACTion:PARameters <AppParameters>
Sets optional parameters for the external executable.
Parameters:
<AppParameters> String parameter
Usage: Asynchronous command
QACTion:WDIRectory <WorkDirectory>
Sets the working directory for the executable.
Parameters:
<WorkDirectory> String parameter
Usage: Asynchronous command
22.7.5
Save / recall
22.7.5.1 Autonaming
MMEMory:AUTonaming:PREFix.................................................................................... 1183
MMEMory:AUTonaming:USERtext................................................................................. 1183
MMEMory:AUTonaming:DATE.......................................................................................1183
MMEMory:AUTonaming:INDex...................................................................................... 1183
MMEMory:AUTonaming:TIME........................................................................................1183
MMEMory:AUTonaming:TEXT....................................................................................... 1184
MMEMory:AUTonaming:DEFaultpath............................................................................. 1184
MMEMory:AUTonaming:RESPath.................................................................................. 1184
MMEMory:AUTonaming:RESall......................................................................................1184
MMEMory:AUTonaming:PREFix <State>
MMEMory:AUTonaming:USERtext <State>
MMEMory:AUTonaming:DATE <State>
MMEMory:AUTonaming:INDex <State>
MMEMory:AUTonaming:TIME <State>
Includes or excludes the name part in the file name pattern for automatic file name
generation. This name is used as the default file name.
The prefix indicates the type of data that is saved, for example, Histogram, RefCurve,
Settings.
To define a user text, use MMEMory:AUTonaming:TEXT.
Parameters:
<State> ON | OFF
*RST: ON
Instrument setup