Instrument setup
R&S
®
RTP
123User Manual 1337.9952.02 ─ 12
4.7.1 Firmware update
Access: "Menu" > "Settings" >"Maintenance" > "FW Update"
Your instrument is delivered with the latest firmware version. Firmware updates are
provided on the internet at:
www.rohde-schwarz.com/firmware/rtp.
The "Release Notes" describe the improvements and modifications of all firmware ver-
sions. They also explain how to update the firmware. They are available along with the
firmware on the same web page.
4.7.2 Alignment
When data from several input channels is displayed at the same time, it may be neces-
sary to align the data vertically or horizontally to synchronize the time bases or ampli-
tudes and positions. This is the case, for example, when strong temperature changes
occur (> 5°).
4.7.2.1 Control
Access: "Menu" > "Settings" >"Maintenance" > "Alignment"
Start Alignment
Starts the self-alignment procedure for all channels.
Remote command:
*CAL? on page 1149
Maintenance settings
To Next Page
Loading...
