Getting started
R&S
®
RTP
85User Manual 1337.9952.02 ─ 12
2. Enter the text as you would on a normal keyboard.
● To enter a series of capital characters, tap "Caps".
To enter one capital character, tap "Shift".
● To use the currently defined value, tap "Cur". This is the value that was used
before the keyboard was displayed.
● The arrow buttons move the cursor left or right.
● "Bksp" deletes the last character before the cursor.
3. Tap "Enter" to complete the entry.
To enter numeric data in a dialog box with navigation controls
1. To navigate to the entry field, press the [⇤] and [⇥] keys.
2. To change the value with a small step size, turn the rotary knob.
Alternatively, press the [▲] and [▼] keys for a larger step size.
If you edit numeric data in tables, the entry field must be in edit mode. To activate the
edit mode, press ENTER, or the [☑] key, or the navigation rotary knob.
3.3.10 Instrument information and notifications
In the upper right corner of the screen, you see the Rohde & Schwarz logo, date and
time, the symbolic information on LAN connection and the notifications status.
Operating the instrument
To Next Page
Loading...
