Remote control commands
R&S
®
RTP
1463User Manual 1337.9952.02 ─ 12
MTESt:FILE:SAVE <MaskTestName>
Saves the specified mask test. It contains the mask definition, defined actions and fail
conditions.
Setting parameters:
<MaskTestName> String with the name of the mask test
Usage: Setting only
Asynchronous command
MTESt:FILE:OPEN <MaskTestName>
Loads the specified mask test to the instrument.
Setting parameters:
<MaskTestName> String with the name of the mask test
Usage: Setting only
Asynchronous command
MTESt:FILE:DELete <MaskTestName>
Deletes the specified mask test.
Setting parameters:
<MaskTestName> String with the name of the mask test
Usage: Setting only
Asynchronous command
22.14.2 Mask definition: user mask
The chapter contains commands required for the definition of user masks - MTESt:
CTYPe is set to USER.
Segment and point indices
In remote control, the numbering of segments and points starts from 0. But in manual
operation, the numbering starts from 1.
MTESt:SEGMent:STATe............................................................................................... 1464
MTESt:SEGMent:ADD..................................................................................................1464
MTESt:SEGMent:COUNt?............................................................................................ 1464
MTESt:SEGMent:INSert............................................................................................... 1464
MTESt:SEGMent:REMove............................................................................................ 1465
MTESt:SEGMent:CLEar............................................................................................... 1465
MTESt:SEGMent:REGion............................................................................................. 1465
MTESt:SEGMent:POINt:ADD........................................................................................1466
MTESt:SEGMent:POINt:INSert......................................................................................1466
MTESt:SEGMent:POINt:REMove.................................................................................. 1466
Mask testing