Rohde & Schwarz RTP044 - Web Interface; Settings on the R&S RTP; Web Browser

Network operation and remote control
R&S
®
RTP
1097User Manual 1337.9952.02 ─ 12
21.3 Web interface
If the R&S RTP is connected to a computer via LAN, you can operate the instrument
from a computer. No additional tools are required, you need only a web browser.
21.3.1 Settings on the R&S RTP
Access: "Menu" > "Settings" > "System" > "Network"
The LAN status icon on the toolbar of the R&S RTP indicates the status of the LAN
connection. A green icon indicates that the instrument is connected to the LAN; a red
symbol indicates an error - mostly the LAN cable is not connected.
The "Network" tab of the "System" dialog box provides network information. See Chap-
ter 4.1.2, "Network settings", on page 90.
Only users with administrator rights can change LAN settings.
21.3.2 Web browser
The instrument's web interface works with all W3C compliant browsers. Only users
with administrator rights on the instrument can use the web interface.
1. Open a web browser on the computer.
2. Type the instrument's host name or IP address in the address field of the browser
on your PC, e.g. "http://10.113.10.203".
The instrument home page opens.
Web interface