Waveform analysis
R&S
®
RTP
294User Manual 1337.9952.02 ─ 12
3. Tap the "Source 1" and "Source 2" icons and select the signal sources to which the
math function is applied. For details on available signal sources, see "Source 1 / 2"
on page 293.
4. Tap the "Type" icon and select the mathematical function.
For details on available operators, see "Type" on page 293.
5. If the operator requires additional parameters, enter them in the input fields.
7.3.4 Equation
In the Equation tab, you can enter complex formulas to define a math waveform. The
formula editor helps to enter formulas easily with correct syntax, using a large selection
of operators and signal sources.
All formulas in the formula editor are linear regardless whether a [dB] is set or not.
► Double-tap the Equation tab to display the formula editor.
7.3.4.1 Formula editor
Using the formula editor you can define math functions freely, using a large selection of
operators and signal sources. For a procedure on using the editor, see Chap-
ter 7.3.4.11, "Defining a formula in the formula editor", on page 301.
Mathematics
To Next Page
Loading...
