Protocol analysis
R&S
®
RTP
870User Manual 1337.9952.02 ─ 12
Column Description
Numeric Hexadecimal value of the field
Formatted Formatted content of the field
Tools
Press "Display settings" in the "Deode Reults" table, to access the "Display" tab.
Remote commands
Remote commands to retrieve decode results are described in Chapter 22.17.22.3,
"Decode results", on page 2112.
13.21.5 Search on decoded SpaceWire data
Using the search functionality, you can find various events in the decoded data. You
can find the same events that you can trigger on, and even many more, since several
event types can also be combined.
Before you can start the search, you have to configure the bus correctly and acquire
decoded data.
To search on decoded data, set the search source to "SerBus" for the configured proto-
col.
For general information on how to handle the search functionality, see Chapter 11,
"Search functions", on page 448.
13.21.5.1 SpaceWire search setup
Access: [Protocol] > "Shortcuts" tab > "Setup search"
Type
Sets the search type for the SpaceWire analysis.
"Control frame"
Searches for the selected control type frame.
SpaceWire (option R&S RTP-K65)
To Next Page
Loading...
