Rohde & Schwarz RTP044 - Page 2112

Remote control commands
R&S
®
RTP
2112User Manual 1337.9952.02 ─ 12
Parameters:
<TimePatternMin>
TRIGger<m>:SWIRe:TYPE <Type>
Sets the trigger type for the SpaceWire analysis.
Suffix:
<m>
.
1..3
Parameters:
<Type> CTRL | DATA | NULL | TIME | ERRor
*RST: CTRL
22.17.22.3 Decode results
BUS<m>:SWIRe:RESults:FCOunt................................................................................. 2112
BUS<m>:SWIRe:RESults:FRAMe<n>:DATA?................................................................. 2112
BUS<m>:SWIRe:RESults:FRAMe<n>:STARt?................................................................ 2113
BUS<m>:SWIRe:RESults:FRAMe<n>:STATe?................................................................ 2113
BUS<m>:SWIRe:RESults:FRAMe<n>:STOP?.................................................................2114
BUS<m>:SWIRe:RESults:FRAMe<n>:TYPE?.................................................................2114
BUS<m>:SWIRe:RESults:FRAMe<n>:FLD<o>:FVAL?.....................................................2115
BUS<m>:SWIRe:RESults:FRAMe<n>:FLD<o>:STARt?....................................................2115
BUS<m>:SWIRe:RESults:FRAMe<n>:FLD<o>:STATus?..................................................2115
BUS<m>:SWIRe:RESults:FRAMe<n>:FLD<o>:STOP?....................................................2116
BUS<m>:SWIRe:RESults:FRAMe<n>:FLD<o>:TYPE?.................................................... 2116
BUS<m>:SWIRe:RESults:FRAMe<n>:FLD<o>:VAL?.......................................................2117
BUS<m>:SWIRe:RESults:FCOunt <Key>
Returns the number of decoded frames for the selected serial bus.
Suffix:
<m>
.
1..4
Setting parameters:
<Key>
Return values:
<Count>
BUS<m>:SWIRe:RESults:FRAMe<n>:DATA?
Returns the data value.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Protocols