Rohde & Schwarz RTP044 - Settings for the Pulse Source

Pulse source and TDR/TDT analysis (option R&S RTP-B7/K130)
R&S
®
RTP
986User Manual 1337.9952.02 ─ 12
Typical applications of the pulse source are:
●
Stimulus for devices under test, for example, as a precise clock
●
Accurate source for deskewing cables and probes for differential measurements
●
Analysis of time-transmission characteristics of a differential signal path
16.1.1 Settings for the pulse source
Access: [App Cockpit] > "Generators" > "PSC"
Terminate all unused outputs of the pulse source with 50 Ω terminating resistors.
Pulse source (option R&S RTP-B7)