Getting started
R&S
®
RTP
81User Manual 1337.9952.02 ─ 12
1 = Floating result box
2 = New tab
3 = Table in a tab above or below
4 = Table in a tab on the left or right
To open the corresponding setup dialog box
1. Double-tap one of the result values.
If a result box is shown, you can also tap the
icon.
2. In the toolbar assist, tap "Advanced Setup" .
The dialog box with corresponding settings opens.
To adjust the font size of results
1. Open the "Menu" > "Settings" > "Appearance" dialog.
2. Select the "Dialogs" tab.
3. Set the "Result dialog" > "Font size".
3.3.8 Using dialog boxes
All functionality is provided in dialog boxes as known from computer programs. You
can control the instrument intuitively with the touchscreen. This section provides an
overview of the accessing methods and describes how to use the dialog boxes.
Each dialog box has four icons in the upper right corner:
Operating the instrument
To Next Page
Loading...
