Rohde & Schwarz RTP044 - Page 1593

Remote control commands
R&S
®
RTP
1593User Manual 1337.9952.02 ─ 12
TRIGger<m>:SPI:MISopattern <MISOPattern>
Specifies the pattern to be triggered on the MISO line.
Parameters:
<MISOPattern> Numeric or string pattern, see Chapter 22.4.6, "Bit pattern
parameter", on page 1148. The string parameter accepts the bit
value X (don't care).
Usage: Asynchronous command
TRIGger<m>:SPI:MOSipattern
<MOSIPattern>
Specifies the pattern to be triggered on the MOSI line.
Parameters:
<MOSIPattern> Numeric or string pattern, see Chapter 22.4.6, "Bit pattern
parameter", on page 1148. The string parameter accepts the bit
value X (don't care).
Usage: Asynchronous command
22.17.4.3 SPI decode results
BUS<m>:SPI:FRAMe<n>:DATA?...................................................................................1593
BUS<m>:SPI:FCOunt?.................................................................................................1594
BUS<m>:SPI:FRAMe<n>:COUNt?................................................................................ 1594
BUS<m>:SPI:FRAMe<n>:BITRate?...............................................................................1594
BUS<m>:SPI:FRAMe<n>:STATus?................................................................................1594
BUS<m>:SPI:FRAMe<n>:STARt?..................................................................................1595
BUS<m>:SPI:FRAMe<n>:STOP?..................................................................................1595
BUS<m>:SPI:FRAMe<n>:WCOunt?.............................................................................. 1596
BUS<m>:SPI:FRAMe<n>:WORD<o>:STARt?.................................................................1596
BUS<m>:SPI:FRAMe<n>:WORD<o>:STOP?................................................................. 1596
BUS<m>:SPI:FRAMe<n>:WORD<o>:MISO?..................................................................1597
BUS<m>:SPI:FRAMe<n>:WORD<o>:FMISo?.................................................................1597
BUS<m>:SPI:FRAMe<n>:WORD<o>:MOSI?..................................................................1598
BUS<m>:SPI:FRAMe<n>:WORD<o>:FMOSi?................................................................1598
BUS<m>:SPI:FRAMe<n>:DATA?
Returns the data words of the specified frame.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Protocols