Rohde & Schwarz RTP044 - Page 1235

Remote control commands
R&S
®
RTP
1235User Manual 1337.9952.02 ─ 12
<n> 1..4
Parameters:
<ShuntMode> INTShunt | EXTShunt
*RST: INTShunt
Usage: Asynchronous command
ZVC:Z<m>:I<n>:SHUNt:MAXCurrent <IntShuntMeasRg>
Sets the maximum current and the internal shunt value.
The internal shunt and maximum current parameter pairs are defined as described in
the table below.
Parameter Internal shunt Maximum current
A100r01
10 A 10 mΩ
A40R01
4.5 A 10 mΩ
A45M10r
45 mA 10 Ω
A4M510r
4.5 mA 10 Ω
A45u10k
45 µA 10 KΩ
A4U510k
4.5 µA 10 KΩ
Suffix:
<m>
.
1..2
<n> 1..4
Parameters:
<IntShuntMeasRg> A100r01 | A40R01 | A45M10r | A4M510r | A45u10k | A4U510k
*RST: A100r01
Usage: Asynchronous command
ZVC:Z<m>:I<n>:SHUNt:MXCValue?
Queries the maximum current.
Suffix:
<m>
.
1..2
<n> 1..4
Return values:
<MaxCurrentValue> Default unit: A
Usage: Query only
Asynchronous command
Acquisition and setup