Rohde & Schwarz RTP044 - Page 1344

Remote control commands
R&S
®
RTP
1344User Manual 1337.9952.02 ─ 12
CHANnel<m>[:WAVeform<n>]:HISTory:PLAY
Starts and stops the replay of the history waveforms.
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
Selects the waveform. If [:WAVeform<n>] is omitted, waveform 1
is adressed.
Usage: Event
Asynchronous command
CHANnel<m>[:WAVeform<n>]:HISTory:REPLay <AutoRepeat>
If ON, the replay of the history waveform sequence repeats automatically. Otherwise,
the replay stops at the stop index set with CHANnel<m>[:WAVeform<n>]:HISTory:
STOP.
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
Selects the waveform. If [:WAVeform<n>] is omitted, waveform 1
is adressed.
Parameters:
<AutoRepeat> ON | OFF
*RST: OFF
Usage: Asynchronous command
CHANnel<m>[:WAVeform<n>]:HISTory:TSDate?
Returns the date of the current acquisition that is shown in the history viewer
(CHANnel<m>[:WAVeform<n>]:HISTory:CURRent).
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
Selects the waveform. If [:WAVeform<n>] is omitted, waveform 1
is adressed.
Return values:
<DateAbsString> String with date of the current acquisition (absolute time)
Usage: Query only
Asynchronous command
Waveform analysis