Rohde & Schwarz RTP044 - Page 1650

Remote control commands
R&S
®
RTP
1650User Manual 1337.9952.02 ─ 12
SEARch:RESult:CAN:FDATa:FRAMe<m>:SCValue? <SearchName>
Returns the stuff bit count modulo 8.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<StuffCount> Range: 0 to 7
Increment: 1
*RST: 0
Usage: Query only
SEARch:RESult:CAN:FDATa:FRAMe<m>:STANdard? <SearchName>
Returns the CAN protocol standard: CAN or CAN FD.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<Standard> CAN | CANFd
*RST: CAN
Usage: Query only
SEARch:RESult:CAN:FRAMe<m>:STARt? <SearchName>
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<FrameStart> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
SEARch:RESult:CAN:FRAMe<m>:STATus? <SearchName>
Suffix:
<m>
.
*
Protocols