Rohde & Schwarz RTP044 - Page 1683

Remote control commands
R&S
®
RTP
1683User Manual 1337.9952.02 ─ 12
SEARch:RESult:LIN:FRAMe<m>:IDSTate? <SearchName>
Returns the status of the identifier.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<IdentifierState> OK | STERror | SPERror | PRERror | UVAL | NOEXists |
INSufficient
STERror: StarT ERror, incorrect start bit
SPERror: StoP ERror, incorrect stop bit
PRERror:PaRity ERror, incorrect parity bit.
UVAL: unexpected value
NOEXists: byte does not exist
*RST: OK
Usage: Query only
SEARch:RESult:LIN:FRAMe<m>:IDValue? <SearchName>
Returns the value of the identifier.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<IdentifierValue> Range: 0 to 63
Increment: 1
*RST: 0
Usage: Query only
SEARch:RESult:LIN:FRAMe<m>:IDPValue? <SearchName>
Returns the value of the identifier parity bit.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<IdParityValue> Range: 0 to 3
Increment: 1
*RST: 0
Protocols