Acquisition and waveform setup
R&S
®
RTP
175User Manual 1337.9952.02 ─ 12
Remote command:
PROBe<m>:SETup:ZAXV on page 1216
5.6.4.3 R&S RT-ZPR power rail probes
Figure 5-9: Probe setup for power rail probe R&S
RT-ZPR
The offset is the channel offset. See "Offset" on page 160.
If the ProbeMeter is active, an additional function is provided in the "ProbeMeter" result
box:
Figure 5-10: ProbeMeter result box for
Specific settings for R&S RT-ZPR probes are the following:
Probes
To Next Page
Loading...
