Rohde & Schwarz RTP044 - Page 1762

Remote control commands
R&S
®
RTP
1762User Manual 1337.9952.02 ─ 12
BUS<m>:HBTO:RESult:FRAMe<n>:CRC?.....................................................................1765
BUS<m>:HBTO:RESult:FRAMe<n>:NUMWords?........................................................... 1765
BUS<m>:HBTO:RESult:FRAMe<n>:DSYMbol?.............................................................. 1765
BUS<m>:HBTO:RESult:FRAMe<n>:SSYMbol?...............................................................1766
BUS<m>:HBTO:RESult:FRAMe<n>:BITRate?................................................................ 1766
BUS<m>:HBTO:RESult:FRAMe<n>:WORD<o>:TYPE?...................................................1766
BUS<m>:HBTO:RESult:FRAMe<n>:WORD<o>:VALue?..................................................1766
BUS<m>:HBTO:RESult:FRAMe<n>:WORD<o>:VSTR?...................................................1767
BUS<m>:HBTO:RESult:FCOunt?
Returns the number of decoded frames.
Suffix:
<m>
.
1..4
Return values:
<FrameCount> Range: 0 to 100000
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:HBTO:RESult:FRAMe<n>:FTYPe?
Returns the type of frame for the selected frame.
Suffix:
<m>
.
1..4
<n> *
Return values:
<FrameType> IDLE | MAC | FILLer | UNKNown
IDLE
IDLE frame. This frame is used for clock synchronization.
MAC
MAC frame. This frame contains information that define how to
go about transmitting and receiving frames.
FILLer
Filler frame. The frame is used to maintain transmission activity.
UNKNown
No meaningful frame can be determined.
*RST: MAC
Usage: Query only
BUS<m>:HBTO:RESult:FRAMe<n>:STATe?
Returns the state of the frame.
Protocols