Rohde & Schwarz RTP044 - Page 1830

Remote control commands
R&S
®
RTP
1830User Manual 1337.9952.02 ─ 12
BUS<m>:RFFE:SEQuence<n>:PADone?
Returns the address-one parity for the selected command sequence.
Suffix:
<m>
.
1..4
<n> *
Return values:
<ParityAddr1> OK | PARity
PARity: PArrity error
*RST: OK
Usage: Query only
BUS<m>:RFFE:SEQuence<n>:PADZero?
Returns the address-zero parity for the selected command sequence.
Suffix:
<m>
.
1..4
<n> *
Return values:
<ParityAddr0> OK | PARity
PARity: PArrity error
*RST: OK
Usage: Query only
BUS<m>:RFFE:SEQuence<n>:PCTRl?
Returns the control parity for the selected command sequence.
Suffix:
<m>
.
1..4
<n> *
Return values:
<ParityCtrl> OK | PARity
PARity: PArrity error
*RST: OK
Usage: Query only
BUS<m>:RFFE:SEQuence<n>:RBTRate?
Returns the read bit rate of the selected command sequence.
Protocols