Rohde & Schwarz RTP044 - Page 1985

Remote control commands
R&S
®
RTP
1985User Manual 1337.9952.02 ─ 12
SEARch:TRIGger:EBTB:DX <SearchName>,<DXSymbol>
SEARch:TRIGger:EBTB:DX? <SearchName>
Sets the x value of the data character Dx.y to be searched for, if SEARch:TRIGger:
EBTB:SYMType is set to Dxy.
Parameters:
<DXSymbol> Range: 0 to 31
Increment: 1
*RST: 0
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:EBTB:DY <SearchName>,<DYSymbol>
SEARch:TRIGger:EBTB:DY? <SearchName>
Sets the y value of the data character Dx.y to be searched for, if SEARch:TRIGger:
EBTB:SYMType is set to Dxy.
Parameters:
<DYSymbol> Range: 0 to 7
Increment: 1
*RST: 0
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:EBTB:EBPA <SearchName>,<EBPattern>
SEARch:TRIGger:EBTB:EBPA? <SearchName>
Sets the 8-bit pattern to be searched for.
Parameters:
<EBPattern>
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:EBTB:GLITcherror <SearchName>,<GlitchError>
SEARch:TRIGger:EBTB:GLITcherror? <SearchName>
Defines, if a search for any glitch error is activated or not.
Parameters:
<GlitchError> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
Protocols