Rohde & Schwarz RTP044 - Page 2124

Remote control commands
R&S
®
RTP
2124User Manual 1337.9952.02 ─ 12
Suffix:
<m>
.
1..4
Parameters:
<Active> ON | OFF
*RST: ON
BUS<m>:PCIE:FIDLe <Active>
Enables the filtering of idle packets.
Suffix:
<m>
.
1..4
Parameters:
<Active> ON | OFF
*RST: ON
BUS<m>:PCIE:GEN <Generation>
Sets the generation of the PCIe technology.
Suffix:
<m>
.
1..4
Parameters:
<Generation> V1 | V2 | V3
V1
PCIe Gen1 (2.5 Gbit/s)
V2
PCIe Gen2 (5 Gbit/s)
*RST: V1
BUS<m>:PCIE:LNKW <LinkWidth>
Sets the link width, the number of lanes that are used for the transmission of the data.
Suffix:
<m>
.
1..4
Parameters:
<LinkWidth> X1 | X2 | X4
*RST: X1
BUS<m>:PCIE:LZER:SOURce <SourceL0>
Sets the signal sources for Lane 0.
Suffix:
<m>
.
1..4
Protocols