Measurements
R&S
®
RTP
368User Manual 1337.9952.02 ─ 12
Meas. type Description/Result
Eye amplitude Eye top - Eye base
Jitter (peak to peak) Average of the jitter for both crossing points.
Jitter = (σcrossing1 + σcrossing2) / 2
Jitter (6*σ) Jitter (6*σ) = Jitter * 6
Jitter (RMS) Quadratic mean of the jitter at both crossing points
8.2.6.2 Settings for eye diagram measurements
Access: [Meas] > "Meas Group" tab > "Eye" category
Eye diagram measurements are only available for sources in the time domain.
To obtain optimized settings for an eye measurement, use the "Autoset" function that is
provided on the right side of the tab.
Autoset
Defines optimized settings for eye diagram measurements on the selected source.
Automatic measurements
To Next Page
Loading...
