Rohde & Schwarz RTP044 - Page 743

Protocol analysis
R&S
®
RTP
743User Manual 1337.9952.02 ─ 12
5. To start searching the acquired waveform for specific events, tap "Enable" in the
search setup dialog:
The R&S RTP displays the "Search Results" box that lists the detected events.
For information on how to configure the search results presentation and how to navi-
gate the search results, see also "To display search zoom windows" on page 470.
13.14.5.4 SSIC search setup
Access: [Search] > "Setup" tab > "Source" = Serial bus configured for M-PHY and "M-
PHY" > "Variant" = "SSIC"
Search criteria
Use the "Search criteria" dialog to define the search type. If you search for frame con-
tent, define the frame type in which data is to be searched.
You can define individual search parameters for the fields of the selected frame in the
table below the "Search criteria". To specify these parameters, select a field in the table
and define the data and/or index operators and values, or the bit state.
For a description of how to set the search conditions, see Chapter 13.14.3.3, "SSIC
trigger settings", on page 731.
Remote command:
SEARch:TRIGger:MPHY:SSIC:ERRor<m>:ENABle on page 1925
SEARch:TRIGger:MPHY:SSIC:FIENable on page 1926
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:ENABle on page 1926
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:BIT on page 1927
SEARch:TRIGger:MPHY:SSIC:BIT on page 1927
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:DMAX on page 1928
SEARch:TRIGger:MPHY:SSIC:DMAX on page 1928
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:DMIN on page 1928
SEARch:TRIGger:MPHY:SSIC:DMIN on page 1928
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:DOPerator on page 1929
SEARch:TRIGger:MPHY:SSIC:DOPerator on page 1929
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:ENABle on page 1926
SEARch:TRIGger:MPHY:SSIC:FRENable on page 1926
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:IMAX on page 1930
SEARch:TRIGger:MPHY:SSIC:IMAX on page 1930
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:IMIN on page 1930
SEARch:TRIGger:MPHY:SSIC:IMIN on page 1930
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:IOPerator on page 1930
SEARch:TRIGger:MPHY:SSIC:IOPerator on page 1930
M-PHY and USB SSIC (option R&S
RTP-K44 and K64)