Protocol analysis
R&S
®
RTP
925User Manual 1337.9952.02 ─ 12
13.23.4.3 Measurements and zoom on eye diagrams
To analyze eye diagrams, you can use the following basic functions of the R&S RTP:
●
Cursor measurements
Cursors can be used on eye diagrams in the usual way. "Track waveform" is not
supported.
For details, see Chapter 8.1, "Cursor measurements", on page 319.
●
Automatic eye measurements
Eye measurements can be used on eye diagrams in the usual way.
For details, see Chapter 8.2.6, "Eye diagram measurements", on page 365.
●
Histograms
You can create histograms on eye diagrams as usual.
For details, see Chapter 8.2.8, "Histograms and histogram measurements",
on page 374.
●
Zoom
You can zoom into eye diagrams using the zoom functions.
For details, see Chapter 7.1, "Zoom", on page 272.
DDR (option R&S RTP-K91/K93 )
To Next Page
Loading...
