ROPA Tiger 6 - Page 153

Operation
Joystick
153 / 564
If, before pressing this key (6), the "Gas" key (42) is pressed and held in this position,
then the minimum lifting speed is set.
42
8
7
9
(7) (8) (9) Programmable keys P1, P2 and P3
Using these keys, three different combinations of machine settings may be saved
and called up by pressing one key. One program may be saved for each key. (See
Page 114)
10
(10) TeachIn / cruise control ON/OFF
The current setting of the machine can be saved on one of the program keys (7) (8) (9)
by pressing and holding the key (10) for a while. It enables you to save the optimum
settings for specific - recurrent - lifting conditions or ground types and call them up by
pressing just one key. For a detailed description see this link (Page 116).
Pressing briefly the key (10) you switch the cruise control OFF/ON (See Page 174).
11
(11) Multifunctional key
Central position of rear axles in operating mode "Road"
The function is only executed when releasing the multi-functional key.
12
13
(12) Set share depth flatter
(13) Set share depth flatter
(See Page 259)