Configuration Guide 802.1X Commands
Use this command to configure the accounting list.
dot1x accounting list-name
The name of the accounting list
If AAA does not adopts 802.1X accounting as the default accounting method. Use this command to
configure the 802.1X accounting method.
The following example configures the accounting list.
Ruijie(config)# dot1x accounting dot1x-acct
4.7 dot1x auth-address-table address
Use this command to configure the authentication address table.
dot1x auth-address-table address mac-addr interface interface
The MAC address of the authentication host
The interface of the authentication host
Global configuration mode
To Next Page
Loading...
Need help?
General