Configuration Guide AAA Commands
1.24 authentication dot1x
Use this command to configure the IEEE802.1x authentication list.
Use the no form of this command to restore the default setting.
authentication dot1x { default | list-name }
Uses this parameter to specify the default method list
The name of the specified method list
With no method list specified, if users send the request, the device will attempt to specify the default
method list for users.
Domain configuration mode
Specify an IEEE802.1x authentication method list for the domain.
The following example sets an IEEE802.1x authentication method list for the specified domain.
Ruijie(config)# aaa domain ruijie.com
Ruijie(config-aaa-domain)# authentication dot1x default
Enables the AAA security service.
Enables the domain-name-based AAA service.
Displays the domain configuration.
1.25 authorization network
Use this command to configure the Network authorization list.
Use the no form of this command to restore the default setting.
authorization network { default | list-name }
Uses this parameter to specify the default method list.
The name of the specified method list
With no method list specified, if users send the request, the device will attempt to specify the default