Command Reference IP Event Dampening Commands
Clears the interface counters.
Displays the statistics of the dampening
interface.
Displays details of the dampening interface.
When a Layer-3 port on a switch is converted to a Layer-2 port (for example, from a routed port to a
switch port), the IP Event Dampening configuration on the port will be deleted.
6.2 show dampening interface
Use this command to show the statistics of the dampening interface.
Privileged EXEC mode/ global configuration mode/ interface configuration mode
The following example displays the statistics of the dampening interface.
Ruijie# show dampening interface
3 interfaces are configured with dampening.
No interface is being suppressed.
Enables the IP event dampening function on
the interface.
Clears the interface counters.
Displays details of IP event dampening
configuration.
To Next Page
Loading...
Need help?
General