Command Reference Basic Configuration Management Commands
2.28 login access non-aaa
Use this command to configure non-AAA authentication on line when AAA is enabled. Use the no
form of this command to restore the default setting.
This function is disabled by default.
Global configuration mode
The following example configures VTY line authentication with AAA enabled.
Ruijie(config)#log access non-aaa
Ruijie(config)#aaa new-model
Ruijie(config)#line vty 0 4
Ruijie(config-line)#login local
Ruijie(config-line)#
2.29 login authentication
If the AAA is enabled, login authentication must be performed on the AAA server. Use this command
to associate login authentication method list. Use the no form of this command to restore the default
setting.
login authentication { default | list-name }
no login authentication { default | list-name }
Name of the default authentication method list
To Next Page
Loading...
Need help?
General