Command Reference DHCP Commands
ping operation to detect the address conflict in the global configuration mode. Use the no form of this
command to restore the default setting.
ip dhcp ping timeout milli-seconds
Time that the DHCP server waits for ping response in the range 100
to 10000 milliseconds.
The default is 500 seconds.
Global configuration mode.
This command defines the time that the DHCP server waits for a ping response packet.
The following example configures the waiting time of the ping response packet to 600ms.
ip dhcp ping timeout 600
Clears the DHCP history conflict record.
Defines the number of the data packets sent by the ping operation for
the detection of the address conflict when the DHCP server assigns
an IP address.
Displays the address conflict the DHCP server detects when it
assigns an IP address.
Use this command to define a name of the DHCP address pool and enter the DHCP address pool
configuration mode in the global configuration mode. Use the no form of this command to restore the
default setting.
no ip dhcp pool pool-name
A string of characters and positive integers, for instance, mypool or 1.
No DHCP address pool is defined by default.
To Next Page
Loading...
Need help?
General