Ruijie RG-S29 Series User Manual

Command Reference IPv6 Commands
3 IPv6 Commands
3.1 clear ipv6 neighbors
Use this command to clear the dynamic IPv6 neighbors.
clear ipv6 neighbors [interface-id]
Parameter
Description
Parameter
Description
interface-id
Interface name. Clear the dynamically learned IPv6
neighbors on the specified interface.
Defaults
N/A
Command Mode
Privileged EXEC mode.
Usage Guide
This command does not clear all the dynamic neighbors on authentication VLAN.
Note that the static neighbors will not be cleared.
Configuration
Examples
The following example clears the dynamic IPv6 neighbors.
Ruijie# clear ipv6 neighbors
Related Commands
Command
Description
ipv6 neighbor
Configures the neighbor.
show ipv6 neighbors
Displays the neighbor information.
Platform
Description
N/A
3.2 ipv6 address
Use this command to configure an IPv6 address for a network interface. Use the no form of this
command to restore the default setting.
ipv6 address ipv6-address/prefix-length
ipv6 address ipv6-prefix/prefix-length eui-64
ipv6 address prefix-name sub-bits/prefix-length [ eui-64 ]
no ipv6 address
no ipv6 address ipv6-address/prefix-length
no ipv6 address ipv6-prefix/prefix-length eui-64
no ipv6 address prefix-name sub-bits/prefix-length [ eui-64 ]

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English