Ruijie RG-S29 Series

Command Reference RIPng Commands
4 RIPng Commands
4.1 clear ipv6 rip
Use this command to clear the RIPng routes.
clear ipv6 rip
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
None
Command
mode
Privileged EXEC mode
Usage Guide
Running this command removes all RIPng routes and this operation may have great impact on the
RIPng protocol. This command should be used with caution.
Configuration
Examples
The following example clears the RIPng routes:
Ruijie# clear ipv6 rip
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
4.2 default-metric
Use this command to configure the default metric for RIPng. Use the no form of this command to
restore the default value.
default-metric metric
no default-metric
Parameter
Description
Parameter
Description
metric
Sets the default metric value. The valid range is from 1 to 16. The
route is unreachable if the metric value is larger than or equal to 16.