Use this command to display the IPv6 source binding database.
show ipv6 source binding [ ipv6-address ] [ mac-address ] [ dhcp-snooping ] [ static ] [ vlan vlan-id ]
[ interface interface-id ]
The following example displays the IPv6 source binding database.
Ruijie# show ipv6 source binding
Total number of bindings: 7
NO. Filter Type Filter Status IPv6 Address
MACAddress VLAN Type Interface
------ ----------- ----------------------
------------------------------------------- --------------- ----
--------------- -------------------
1 IPv6+MAC Inactive-system-error 2000::127
0001.0002.0003 1 Static Global
2 IPv6-ONLY Active 2008::4
0001.0002.0004 1 DHCPv6-Snooping GigabitEthernet 0/5
3 IPv6-ONLY Active 2008::7
0001.0002.0007 1 Static Global
4 IPv6+MAC Active 2008::1
0001.0002.0006 1 Static Global
5 UNSET Inactive-restrict-off 2008::9
0001.0002.0009 1 DHCPv6-Snooping GigabitEthernet 0/1
6 IPv6-ONLY Active Deny-All
GigabitEthernet 0/5