Command Reference LLDP Commands
11.26 show lldp network-policy profile
Use this command to display the information about an LLDP network policy.
show lldp network-policy { profile [ profile-num ] | interface interface-name }
ID of a network policy, in the range from 1 to 1024.
If profile-num is specified, the information about the specified network policy is displayed.
If no parameter is specified, the information about all network policies is displayed.
The following example displays the information about a network policy.Ruijie#
show lldp network-policy profile
network-policy information:
--------------------------
Network Policy Profile 1
voice vlan 2 cos 4 dscp 6
voice-signaling vlan 2000 cos 4 dscp 6
11.27 show lldp statistics
The following example displays LLDP statistics.
show lldp statistics [ global | interface interface-name ]
To Next Page
Loading...
Need help?
General