Ruijie RG-S29 Series

Command Reference IP Event Dampening Commands
6.3 show interface dampening
Use this command to display the details of IP event dampening configuration.
show interface [ interface-Id ] dampening
Parameter
Description
Parameter
Description
interface-id
Interface name
Defaults
N/A
Command
mode
Privileged EXEC mode/ global configuration mode/ interface configuration mode
Usage Guide
If the interface-id is specified, only the dampening information of this specified interface is displayed.
Configuration
Examples
The following example shows the details of IP event dampening configuration.
Ruijie# show interface dampening Ethernet1/0
Flaps Penalty Supp ReuseTm HalfL ReuseV SuppV MaxSTm MaxP Restart
0 0 FALSE 0 5 1000 2000 20 16000 0
Domain
Description
Flaps
Interface flapping times.
Penalty
The current penalty value on the interface.
Supp
Suppressed or not.
ReuseTm
Time to unsuppress the interface, in seconds.
HalfL
Half-life period, in seconds.
ReuseV
Unsuppressed threshold.
SuppV
Start suppression threshold.
MaxSTm
Maximum suppression time.
MaxP
Maximum penalty value.
Restart
The initial penalty value on the interface.
Related
Commands
Command
Description
dampening
Enables the IP event dampening function.
clear counters
Clears the interface counters.
show dampening interface
Displays statistics of the dampening interface.
Platform
Description
N/A