Ruijie RG-S29 Series

Command Reference IPv6 Commands
the denial service attack. Therefore, forwarding the IPv6 packet with route header is disabled by
default. However, the IPv6 packet of route header with type 0 that destined to the local machine is
processed.
Configuration
Examples
Ruijie(config)# no ipv6 source-route
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
3.28 show ipv6 address
Use this command to display the IPv6 addresses.
show ipv6 address [ interface-name ]
Parameter
Description
Parameter
Description
interface-name
Interface name
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
The following example displays all IPv6 address configured on the device.