Ruijie RG-S29 Series

Configuration Guide Storm Control Commands
10 Storm Control Commands
10.1 show storm-control
Use this command to display storm suppression information.
show storm-control [ interface-type interface-number]
Parameter
Description
Parameter
Description
interface-type
interface-number
Specifies an interface.
Defaults
N/A
Command
Mode
Privileged EXEC mode/Global configuration mode/Interface configuration mode
Usage Guide
N/A
Configuration
Examples
The following example displays storm control configuration on FastEthernet 0/1.
Ruijie# show storm-control fastEthernet 0/1
Interface Broadcast Control Multicast Control Unicast Control
Action
------------------------- ----------------- -----------------
--------------- --------
FastEthernet 0/1 1% 50% 1% none
Related
Commands
Command
Description
storm-control
Enables storm suppression.
Platform
Description
N/A
10.2 storm-control
Use this command to enable the storm suppression for unknown unicast packets.
Use the no or default form of this command to restore the default setting.
storm-control unicast [ { level percent | pps packets | rate-bps } ]
no storm-control unicast
default storm-control unicast