Ruijie RG-S29 Series

Command Reference RIPng Commands
redistributing other routing protocols.
distribute-list
Filters the RIPng routing update packets.
Platform
Description
N/A
4.12 show ipv6 rip
Use this command to show the parameters and each statistical information of the RIPng routing
protocol process.
show ipv6 rip
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
mode
Privileged EXEC mode or user mode.
Usage Guide
N/A
Configuration
Examples
Ruijie# show ipv6 rip
Routing Protocol is "RIPng"
Sending updates every 10 seconds with +/-50%, next due in 8 seconds
Timeout after 30 seconds, garbage collect after 60 seconds
Outgoing update filter list for all interface is:
distribute-list prefix aa out
Incoming update filter list for all interface is: not set
Default redistribution metric is 1
Default distance is 120
Redistribution:
Redistributing protocol connected route-map rm
Redistributing protocol static
Redistributing protocol ospf 1
Default version control: send version 1, receive version 1
Interface Send Recv
VLAN 1 1 1
Loopback 1 1 1
Routing Information Sources:
None
Related
Command
Description