Ruijie RG-S29 Series User Manual

Command Reference QoS Commands
Ratelimit input: 10240 256
Ratelimit output: 51200 4096
Attached input policy-map: pmap1
Attached output policy-map:
Default trust: dscp
Default cos: 3
The fields in the output of this command are described in the following table.
Field
Description
Interface
Indicates the interface name.
Ratelimit input
Indicates the input rate limit value .
Ratelimit output
Indicates the output rate limit value .
Attached input policy-map
Indicates the input policy map .
Attached output policy-map
Indicates the output policy map.
Default trust
Indicates the trust mode of the interface.
Default cos
Indicates the default CoS value.
The following example displays the QoS configuration of all interfaces.
Ruijie# show mls qos interface policers
Interface: GigabitEthernet 0/1
Attached input policy-map: pmap1
Attached output policy-map: pmap1
Interface: GigabitEthernet 0/2
Attached input policy-map: p1
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
2.21 show mls qos maps
Use this command to display DSCP-CoS mapping, CoS-DSCP mapping and IP-PRE-DSCP
mapping.
show mls qos maps [ cos-dscp | dscp-cos | ip-prec-dscp ]
Parameter
Description
Parameter
Description
cos-dscp
Displays the CoS-DSCP mapping.
dscp-cos
Displays the DSCP-CoS mapping.

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English