Command Reference Line Commands
Terminal type. CON indicates console; 0 indicates terminal line
number and * ahead of the number means that the terminal is in use.
Terminal type, including CON, AUX, TTY, and VTY.
The number of overrun errors received by the flash.
Line location configuration.
Special characters, including Escape, Disconnect, and Activation
characters.
Timeout value; “never” indicates no timeout.
Whether to enable command history; the number of commands in the
command history.
Data volume received from the drive.
Date volume sent to the drive.
Data reception interruption times.
Use this command to display the privilege level of the line.
The following example displays the privilege level of the line.
To Next Page
Loading...
Need help?
General