Command Reference SYS Commands
Privileged EXEC mode / global configuration mode
The following example displays the software clock when the time zone is disabled.
Ruijie# show clock
18:22:20 UTC Tue, Dec 11, 2012
The following example displays the software clock when the time zone is enabled.
Ruijie# show clock
03:07:49 TSZ Wed, Feb 29, 2012
Use this command to display the information on the system task running on the control core instead of the
non-virtual core.
show cpu
Privileged EXEC mode/ global configuration mode
If the system is equipped with a virtual core, you can use the show processes cpu command to check the
CPU usage of the virtual core.
The following example displays the information on the system task running on the control core instead of
the non-virtual core.
Ruijie#show cpu
===============================================
CPU Using Rate Information
To Next Page
Loading...
