Ruijie RG-S29 Series User Manual

Command Reference RIP Commands
information source learnt ( source addresses of RIP route update packets ) for the convenience of
user monitoring. This routing information source is called RIP neighbor information.
show ip rip peer [ ip-address ]
Parameter
Description
Parameter
Description
ip-address
( Optional ) Displays the IP address of a specified RIP neighbor.
Defaults
N/A
Command
Mode
Privileged EXEC mode/ Global configuration mode/ Routing process configuration mode
Usage Guide
This command is used to display the RIP neighbor information. If no RIP neighbor exists, no
information will be displayed.
Configuration
Examples
The following example displays the RIP neighbor information.
Ruijie# show ip rip peer
Peer 192.168.3.2:
Local address: 192.168.3.1
Input interface: GigabitEthernet 0/2
Peer version: RIPv1
Received bad packets: 3
Received bad routes: 0
BFD session state up
S29 series switch does not support BFG. The configuration example is only for reference.
Related
Commands
Command
Description
show ip rip
Displays the information of the routing protocol
process that is running.
Platform
Description
N/A
1.34 timers basic
Use this command to adjust the RIP clock. Use the no form of this command to restore the default
setting.
timers basic update invalid flush
no timers basic
Parameter
Parameter
Description

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English