Ruijie RG-S29 Series

Configuration Guide DHCP Snooping Commands
Switch DHCP snooping status :ENABLE
Verification of hwaddr field status :DISABLE
DHCP snooping database write-delay time: 0 seconds
DHCP snooping option 82 status: ENABLE
DHCP snooping Support Bootp bind status: ENABLE
Interface Trusted Rate
limit(pps)
------------------------ ----------------
----------------
GigabitEthernet 0/4 YES unlimited
Default No
Related
Commands
Command
Description
ip dhcp snooping
Enables the DHCP Snooping globally.
ip dhcp snooping verify mac-address
Enables the check of source MAC address of
DHCP Snooping packets.
ip dhcp snooping write-delay
Sets the interval of writing user information to
FLASH periodically.
ip dhcp snooping information option
Adds option82 to the DHCP request message.
ip dhcp snooping bootp-bind
Enables the DHCP Snooping bootp bind
function.
ip dhcp snooping trust
Sets the port as a trust port.
Platform
Description
N/A
14.20 show ip dhcp snooping binding
Use this command to display the information of the DHCP Snooping binding database.
show ip dhcp snooping binding
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode
Usage Guide
This command is used to display all the information of the DHCP Snooping binding database.
Configuration
1: The following example displays the information of the DHCP Snooping binding database.