Command Reference GVRP Commands
Leaveall Timers(ms):1000
Port based GVRP Configuration:
PORT Applicant Status Registration Mode
----------------------- -------------------- ---------------------
GigabitEthernet 0/2 normal normal
GVRP dynamic VLAN creation
Whether to enable dynamic VLAN creation
10.12 show gvrp statistics
Use this command to display the GVRP statistics of one interface or all interfaces.
show gvrp statistics { interface-id | all }
Use the show gvrp statistics to display the statistics of one interface or all interfaces.
Ruijie# show gvrp statistics gigabitethernet 1/1
Interface GigabitEthernet 3/1
RecValidGvrpPdu 0
RecInvalidGvrpPdu 0
RecJoinEmpty 0
To Next Page
Loading...
Need help?
General