Command Reference Interface Commands
1.3 clear counters
Use this command to clear the counters on the specified interface.
clear counters [ interface-id ]
Interface type and interface ID
In the privileged EXEC mode, use the show interfaces command to display the counters or the clear
counters command to clear the counters. If the interface is not specified, the counters on all
interfaces will be cleared.
The following example clears the counters on interface gigabitethernet 1/1.
Ruijie# clear counters gigabitethernet 1/1
Displays the interface information.
Use this command to reset the interface.
clear interface interface-type interface-number
interface-type
interface-number
Interface type and interface ID
To Next Page
Loading...
Need help?
General