Ruijie RG-S29 Series User Manual

Command Reference sFlow Commands
Parameter
Description
Parameter
Description
rate
Sampling rate of sFlow sampling. One packet is sampled from every n
packets (n equals the value of rate). The range is from 4,096
to16,777,215.
Defaults
The default sFlow flow sampling rate is 8,192.
Command
Mode
Global configuration mode
Default Level
14
Usage Guide
This command is used to configure the global sampling rate of sFlow flow sampling, and sFlow flow
sampling of all interfaces uses this sampling rate.
Configuration
Examples
The following example sets the sFlow flow sampling rate to 4,096.
Ruijie(config)# sflow sampling-rate 4096
Verification
Use the show sflow command to display the sFlow flow sampling rate.
Prompt
Messages
N/A
Common
Errors
N/A
Platforms
N/A
7.10 show sflow
Use this command to display the sFlow configuration.
show sflow
Parameter
Description
Parameter
Description
N/A
N/A
Command
Mode
Privileged EXEC mode/global configuration mode/interface configuration mode
Default Level
14
Usage Guide
N/A

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English