Ruijie RG-S29 Series User Manual

Command Reference sFlow Commands
Configuration
Examples
The following example displays the sFlow configuration.
Ruijie(config)#show sflow
sFlow datagram version 5
Global information:
Agent IP: 10.10.10.10
sflow counter interval:30
sflow flow max-header:64
sflow sampling-rate:8192
Collector information:
ID IP Port Size VPN
1 192.168.2.100 6343 1400
2 NULL 0 1400
Port information
Interface CID FID Enable
TenGigabitEthernet 0/1 0 1 Y
TenGigabitEthernet 0/2 0 1 N
Field Description:
Field
Description
sFlow datagram version
sFlow datagram version.
Currently, Ruijie supports V5 only.
Agent IP
IP address of the sFlow Agent. It can be configured by using the
sflow Agent address {ip-address | ipv6 ipv6-address } command.
sflow counter interval
Counter sampling interval
sflow flow max-header
The maximum length of bytes of the packet header to be copied
sflow sampling-rate
Flow sampling rate
ID
sFlow Collector ID
IP
The IP address of the sFlow Colletor to receive sFlow datagram
Port
Port No. of the sFlow Collector to receive sFlow datagram
Size
The maximum length of the output sFlow datagram
VPN
VPN instance name of sFlow Collector
Interface
An interface configured with sFlow function
CID
The destination sFlow Collector ID to which the sFlow Agent
sends the counter samples.
FID
The destination sFlow Collector ID to which the sFlow Agent
sends the flow samples.
Enable
The status of the sFlow sampling function
Prompt
Messages
N/A
Platforms
N/A

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English