Command Reference OSPFv2 Commands
2.54 show ip ospf neighbor
Use this command to display the OSPF neighbor list.
show ip ospf [ process-id ] neighbor[ statistics | { [ interface-type interface-number ] | [ neighbor-id ]
| [ detail] } ]
Displays ID of the process.
(Optional) Displays the neighbor details.
interface-type
interface-number
(Optional) Displays the neighbor information of the specified interface
(Optional) Displays the information of the specified neighbor
(Optional) Displays the neighbor statistics.
This command displays neighbor information usually used to check whether the OSPF is running
normally.
Use this command to display the OSPF routes.
show ip ospf [ process-id ] route [ count | ip-address mask ]
OSPF process ID. All OSPF routes will be displayed without an ID
specified.
Statistics of various OSPF routes
To Next Page
Loading...
Need help?
General