Configuration Guide IP Source Guard Commands
excludes a VLAN.
Ruijie# configure terminal
Ruijie(config)# interface GigabitEthernet 0/1
Ruijie(config-if-GigabitEthernet 0/1)# ip verify source
Ruijie(config-if-GigabitEthernet 0/1)# ip verify exclude-vlan 1
Ruijie(config-if)# end
18.4 show ip source binding
Use this command to display the binding information of IP source addresses and database.
show ip source binding [ ip-address ] [ mac-address ] [ dhcp-snooping ] [ static ] [ vlan vlan-id ]
[ interface interface-id ]
Displays user binding information of corresponding IP.
Displays user binding information of corresponding MAC.
Displays binding information of dynamic user.
Displays binding information of static user.
Displays user binding information of corresponding VLAN.
Displays user binding information of corresponding interface.
The following example displays the binding information of IP source guard addresses and database.
Ruijie# show ip source binding static
Ruijie#show ip source binding static
Total number of bindings: 5
NO. MACADDRESS IPADDRESS LEASE(SEC) TYPE VLAN INTERFACE
----- ------------------ --------------- ------------ ------------- -----