Command Reference VRRP Commands
Master Down interval is 9 sec
Ruijie#
The following example displays the brief information of the VRRP group.
Ruijie# show vrrp brief
Interface Grp Pri timer Own Pre State Master addr Group addr
Gi 0/0 1 100 10.82 - P Backup 192.168.201.213 192.168.201.1
Gi 0/0 2 120 10.59 - P Master 192.168.201.217 192.168.201.2
Ruijie#show ipv6 vrrp brief
Interface Grp Pri timer Own Pre State Master addr Group addr
Gi0/13 1 100 3.60 - P Master FE80::1 FE80::2
vrrp group ip ipaddress [ secondary ]
Enables the VRRP function and set the IP
address for the virtual device.
Use this command to display the information of the VRRP on the interface.
show [ ipv6 ] vrrp interface type number [ brief ]
(Optional) Applies to IPv6 VRRP.
(Optional) Displays the brief of the VRRP group on the interface.
Privileged EXEC mode/Global configuration mode/Interface configuration mode
The following example displays the VRRP information on Ethernet interface E1/0.
Ruijie# show vrrp interface fastethernet 0/0
FastEthernet 0/0 - Group 1
State is Backup
Virtual IP address is 192.168.201.1 configured
Virtual MAC address is 0000.5e00.0101
Advertisement interval is 3 sec